Drilling Rigs
Candrill 1200
![]() | Candrill 1200 MAST: -Mast Type: 142” cantilever SUBSTRUCTURE: -Substructure Type: 4 piece, hydraulically self elevating DRAWWORKS: -Manufacture/Model: TSM 1500 AC MUD PUMPS: Mud Pump #1 -Manufacturer & Model: H & H F1600 Mud Pump #2 -Manufacturer &; Model: H & H F1600 -Rated Power: 1600 hp -Stroke: 12" -Mud Pump Drive: GE 29 AC traction motors rated @ 1500 hp MUD SYSTEM: -Total Capacity: Victory Rig Equipment 1500 bbls (Three Tank System) -Shakers: 3 EA Mi Swaco Mongoose 4 panel linear motion shakers -Desilter: 1 EA Mi Swaco 9622510 w/20EA 4" cones with grooved end inlet and overflow, desilting capacity of 1300 gpm. -Desander: 1 EA Mi Swaco 9621290 w/3EA 10" diameter cones with grooved end inlet and overflow, desanding capacity of 1500 gpm. -Vacuum Degaser: 1 EA Mi Swaco 9269094, 60" vessel with a capacity of 1000 gpm. -Trip Tank: 1 EA 90bbls | |
BOP EQUIPMENT: -1EA 13-5/8" Shaffer Annular; 5,000 psi WP; Nace Trim (API Spec 16A) -1EA 13-5/8" Cameron Type U Single Ram BOP; 10,000 psi WP; Nace Trim -1EA 13-5/8" Cameron Type U Double Ram BOP; 10,000 psi WP; Nace Trim MANIFOLD: -1 EA 4-1/16" x 3-1/16" 10,000 psi ACCUMULATOR: -Control Tech 6 station, 270 gallon c/w 2 EA pneumatic pumps and 1 EA electric triplex pump BLOCK: -Victory Rig Equipment 400 Ton, 6 Sheave TOP DRIVE: -National Oilwell Varco TDS11, AC 500 Ton, 37,500 ft-lbs, 800 HP ROTARY TABLE: -National Oilwell Varco IR-3080-88" 4 ¼" to 8", 80,000 ft-lbs torque, remote controlled IRON ROUGHNECK -National Oilwell Varco IR-3080-88" 4 ¼” to 8", 80,000 ft-lbs torque, remote controlled CATWALK MACHINE: -Pragma PowerCat 3000
| POWER SYSTEM: -ABB VFD, Eaton MCC, Woodward Generator Control and three (3) 1476 BHP, 1200 RPM, 1750 KVA Caterpillar 3512C Engine Generator Sets DRILL COLLARS: -40 EA 6-1/2" DC w/ NC46 Connections, 12 EA 8" DC w/ NC 56 Connections DRILL PIPE: -319 joints of 4", 15.7 # ft., grade XD-105, Range III w/ 6-5/8" TJ and GPDS40 connections WATER TANK: -500 bbls capacity FUEL TANK: -14,000 gallons capacity, telescoping from water tank TOOL/STORAGE: -Parts storage room and tool house room MOVING SYSTEM: -6 EA Lift & Roll jacks located in substructure side boxes with ability to skid 360 degrees CAMP: -Tool Pusher House: One 14’ x 48’ skidded |

